Brick cutting machineProduct description1. This machine is used for cutting the adobe strip from extruder according to the length requirement of adobe piece cutting machine to adobe section. And feed them into piece cutting machine.
2. To meet different requirements of production technology. Our company produces out two kinds of different products: Verticle section cutter, circular arc cutter. This machine can adjust the cutting strip length and cut the adobe strip automatically, the verticle cutter has the features like verticle cutting, small stub, and high efficientcy.
3. Slug Cutter SQT500*300 is mainly used for vertically cut of column from vacuum extruder and transport clay column in equal length to powered belt conveyer. The entire working process is under automatic control of PLC.
Its cutting wire are pneumatically tensioned, and the tension can be adjusted directing at different products, in order to keep wire sharp, sections flat and service life of wires improved. Before cutting, a sensor equipped on the driven shaft of conveyer can feed back the speed of clay material from the extruder to the control center accurately, and the cutting frame is driven to move simultaneously with the clay, ensuring the cutting sections of column to be perpendicular to the bottom surface, and reduce the waste.
Technical Parameters| Specification | Cutting Frequency (time/min.) | Cut billet length(mm) | Working Pressure (MPa) | Power (kW) | Dimensions(mm) |
| SQT500×300 | 30 | >500 | 0.6~0.8 | Single Power | Total Power | 4300×1140×2065 |
| 2.2 | 5.75 |
| 1.5×2 |
| 0.55 |
Our Services:Before-sale services:
(1) Tell customer how to build a brick plant, the complete plant including three parts, brick shaping machinery, drying and firing. (Confirm clay, power electricity, water, land area, fund)
(2) Guide customers to choose the best and economic plant, recover the investment within short time.
(3) site inspection<
(4) We are responsible for the offer, flow chart, and detail specification of each machinery.
In-Sale services:
(1)Quality control must be inspected strictly
(2)In accordance with the agreements stipulated in the contract
After-sale services:
(1) We will send the technicians to guide with device installation, debugging and training operators until customers are fully satisfied.
(2) Guarantee for machinery, materials and equipment supplied under this quotation are valid for a period of 12 months after commissioning or 16 months after delivery whichever is earlier. Warranty shall cover manufacturing defect in material and workmanship but exclude:
1. Daily wear and tear 2. Mishandling or improper operation3. Incoming power supply fluctuation
4. Consumable and spare parts.
(3) Regular visit customer, consult with the customer feedback, come true with the customer's two-way communication.
Technological Process of the whole brick&block production line:
FAQ:
1. what's the raw material for producing bricks?
Answer: clay,mud,gangue,shale etc.
2. how much land area for building a new brick plant?
Answer: it need above 20,000 square meters,the land area relate with capacity
3. when you need our proposal and quotation,what you have to mention in your inquiry.
Answer:please provide daily capacity,the brick size and you want to build a new brick plant or brick making machingery only. so we can give the proposal and offer accordingly.
4. what's the Trade terms?
Answer: it can be EXW,FOB,CIF,CNF,FCA,CPT, CIP
5.Vido on line
http://www.brictec.com/video_big.asp?bigclassid=9
