Brief introduction of 180mm wet diamond saw bladeTechnic: Cold pressed -- Sintered.
Application: For all the masonry materials cutting
Surface: Painting with your company name as you need
Direction: Working without water, but best cutting result with water.
DIY Sintered Diamond Cutting Blade Advantage
Usage: Longer working life, fine cutting capability, nice surface, higher safety, smooth cutting
Section & edge, thin kerf avoid more waste in cutting, etc.
AS following is part of our product. If you have any needs, please let me know.
Attention when use:1. Before saw blade installed, pollutions adhering between saw blade and flange shall be removed,
When installing saw blade, the marked direction shall be kept consistent with the rotating
Direction of electric tools, and flange shall be fastened by spanner attached to electric tools
2. Do not use any saw blade that has been deformed for being pressed of crashed
3. When operating, operator must wear safety helmet, safety footwear and goggles, protective glove,
Additionally, if necessary operator must use earplug, mask and so on
4. Electric tools shall have protective cover
5. Ahead of operation, operator must confirm that no other irrelevant person is present
6. Cutting operation shall be started after saw blade sufficiently rotated, First cutting slowly, then normal cutting after operation stabilized, excessive force or curved cutting is prohibited
Outer diameter
| Bore
diameter(mm)
| Segment
thickness(mm)
| Segment
height(mm)
|
mm
| inch
|
105
| 4
| 20
| 1.8
| 7
|
110
| 4.3
| 22.23
| 1.8
| 7
|
115
| 4.5
| 22.23
| 2.0
| 7
|
125
| 5
| 22.23
| 2.0
| 7
|
150
| 6
| 22.23
| 2.2
| 7
|
180
| 7
| 22.23
| 2.2
| 7
|
200
| 8
| 22.23
| 2.4
| 7
|
230
| 9
| 22.23
| 2.6
| 7
|
250
| 10
| 25.4
| 2.8
| 7
|
300
| 12
| 25.4
| 3.2
| 7
|
350
| 14
| 25.4
| 3.4
| 7
|
Zhejiang changheng tools co. Ltd is seated in hardware city -yongkang, it' S profession saw blade manufacturer. The product is involved with Tungsten carbide tipper circular saw blades, Diamond saw blade, mower saw blades etc, we can offer hundreds type of specification based on different saw blade. So far, the company covers an area over 30, 000 square meters and an annual production over 20, 000, 000 saw blades. The product will be exported many countries such as MID-east, Asia, Europe, America etc.
To ensure the good quality, the company adopts the most advanced technology and device from Japan and Germany. And make our work shop form one set completely speciialized production line. What' S more we also improve our management strategies on time and our company passed ISO2000 quality system Authentication in 2003, our product passed TUV certification.
The company will do its utmost to cultivate our famous brand and sincerely welcome merchants from home and abroad to cooperate with us!
