Welded Diamond Cutting Disc for Polishing Tiles
| Price: |
US $ 10-30/Piece |
| Min Order: |
10/Piece |
| Pay Type: |
L/C,T/T,D/P |
DIAMOND CUTTING DISCThis product is used to make cutting and grooving on ceramic tiles on automatic and manual cutting machines. There are four normal working modes; manual single-blade full cutting, automatic single- blade full cutting, automatic two-blade full cutting and pre-cutting, chamfering and full cutting Our diamond cutting disc are approved for their high working speed, fine and precise cutting effect, low tiles edge-breaking ratio and long working lifetime.WELDED DIAMOND CUTTING DISCThis product is used to make cutting on polished porcelain tiles, wearable ceramic tiles,rustic tiles, glaze floor and wall tiles . It can be used by single blade and multi blades. Our welded diamond cutting discs are approved for their good sharpness, smooth and flat cutting slots, no chipping and long working lifetime. This product is normally used on single-head or two-head automatic cutting machines and manual cutting machines.APPLICATION
SPEC AND PARAMETER| DESCRIPTION | OUTER DIAMETER | THICKNESS
(MM) | HEIGHT
(MM) | ARBOR | GRIT |
| INCHES | METRIC(MM) |
| WELDE DIAMOND CUTTING DISC | 7 | 180 | 1.8/2.0 | 10 | 60 | D107
D126
D151
D181
D213
D252
D301 D427 |
| 8 | 200 | 1.8/2.0 | 10 | 60 |
| 10 | 250 | 1.8/2.0/2.2/2.4 | 9/10 | 60 |
| 12 | 300 | 1.2/1.4/1.6/
1.8/2.0/2.2/2.4 | 9/10 | 60 |
| 14 | 350 | 2.8/3.0/3.2 | 9/10 | 60 |
| 16 | 400 | 2.8/3.0/3.2 | 9/10 | 60 |
OTHER SPESC ARE AVAILABLE UPON REQUEST.
Procedure
| Prod Model: |
HKL1402 |
| Used: |
Marble Marble Stones Ceramic |
| Industry: |
Ceramic Industry |
| Working Conditions: |
Water Cooling |
HENKOOLEE TRADING LIMITED mainly engaged in exporting machinery & consumable products of ceramic tile produce process. We have an expert team, who can be consultant for new ceramic plant design, machinery technology modification of existed production line, all of them have more than 10 years experience in this ceramic field.
Since 2008 till today, we are doing business mostly with Indian ceramic factories, during this period, we keep choosing best suppliers of China for our Indian friends, however, every ceramic factory has the difference, we take the responsibility to look for the proper supplier for clients need. Fortunately, our clients satisfy the machinery manufacturers we suggested in these years, so mostly these manufacturers became fixed suppliers, and due to this reason, clients became our good friends gradually, the cooperation between our three parties goes very well.
Our company aim: Quality is the first, based on solving problems for clients as our friends, try our best to do top service and low down the produce cost. In the future, we will stick to our aim, adhere the principle of doing all work sincerely & seriously. Let's forge ahead, business scale is continually expanding!
