5" Circle Diamond Band Saw Dry Cutting Blades with protected segment
Applicable Machine: Angle Grinder
Specification: 4"(Φ105mm)~9"(Φ230mm)
Application: Granite, Marble, Sandstone, Engineered stone, Quartzite, Ceramic, Concrete, Asphalt, Refractory brick
Advantange: Good sharpness, Long lifespan
| 5" Circle Diamond Band Saw Dry Cutting Blades with protected segment |
| Item No. | Outside Diameter | Segment Thickness (mm) | Segment Height (mm) | Application | Thread |
| Inch | mm |
| SY-DSB-39 | 4 | 100 | 2 | 8.0-9.0 | Granite/ | M14 |
| 4.5 | 114 | 2.2 | 8.0-9.0 | Sandstone/ | M16 |
| 5 | 125 | 2.2 | 8.0-9.0 | Engineered stone/ | 22.23 |
| 6 | 150 | 2.4 | 8.0-9.0 | Quartzite | |
| 7 | 180 | 2.6 | 8.0-9.0 | | |
| 9 | 230 | 2.6 | 8.0-9.0 | | |
Sunny Professional Diamond Bridge Saw Marble Blades have a bond designed to optimize your saw's cutting performance when cutting marble or other soft stone, such as travertine and limestone.
Marble cutting blades provide efficient cutting in soft materials, as well as providing a smooth cut. The fact that a marble blade leaves a better working area is key to finishing the job in less steps. Sunny Marble Blades allow you to do this by providing a chip free edge and consistent cut of marble and soft stone.
Remember the surface feet per minute should be faster when cutting marble. Adjust your saw's RPM or you can compensate by using a larger size marble blade than granite. Example: if RPM is set for using 14" granite blade, leave saw at that RPM, but use a 16" marble blade.
