Screwed Ball Float Steam Trap FT14
| Price: |
US $ 30-100/Piece |
| Min Order: |
10/Piece |
| Pay Type: |
L/C,T/T |
Screwed Ball Float Steam Valve
The FT14-T is ball float steam trap having stainless steel working internals and integral automatic air venting facility. The FT14-T can be maintained without disturbing the pipework.
Available types
FT14 (R-L) Horizontal connections with flow from right to left
FT14 (L-R) Horizontal connections with flow from left to right
Sizes and pipe connections
½", ¾" and 1" screwed BSP or NPT. | Limiting Condition |
| Body design conditions | PN16 |
| PMA Maximum allowable pressure | 16 bar g @ 100°C |
| TMA Maximum allowable temperature | 250°C @ 13 bar g |
| Minimum allowable temperature | -10°C |
| PMO Maximum operating pressure for saturated steam service | 14 bar g |
| TMO Maximum operating temperature | 250°C @ 13 bar g |
| Minimum operating temperature | 0°C |
| PMX Maximum differential pressure | FT14-4.5 | 4.5 bar |
| FT14-10 | 10 bar |
| FT14-14 | 14 bar |
| Designed for a maximum cold hydraulic test pressure of 24 bar g |
Material: Body:A216 WCB
Bonnet:A216 WCB
Seat:Stainless Steel
Ball Float and Lever:Stainless Steel Capacities
Capacities shown above are based on condensate at saturation temperature. When discharging sub-cooled condensate the air vent provides extra capacity. Under start-up conditions when the condensate is cold the internal thermostatic air vent will be open and provides additional capacity to the main valve. On 4.5 bar units this will provide a minimum of 50% increased capacity above the hot condensate figures shown. On 10 and 14 bar units this will be a minimum increase of 100% on the published capacity. The above table gives the minimum additional cold water capacities from the air vent.
| Prod Model: |
FT14 |
| Mini Working Pressure: |
0.01MPa |
| Valve Body, Cap: |
Cast Steel/Stainless Steel |
| Valve Seat: |
Stainless Steel |
| Working Medium: |
Saturated Vapor, Condensed Water |
| Pin: |
Stainless Steel |
| Ball Float And Lever: |
Stainless Steel |
| Cover Gasket: |
Graphite |
| Size: |
1/2"-1" |
Zhejiang Xiutai Valve Co., Ltd is located in the hometown of valve- Oubei Town, Wenzhou. The company established in 2001, is a valve enterprise with collection of production and sales of high, medium and low pressure. Various valves with reliable quality and favorable price sell well both at home and abroad. Our main products is steam traps, ball valves, gate valve, globe valve, check valve, needle valve and y-strainers.
The steam traps mainly include thermodynamic type, free ball float type, inverted bucket type bimetal type, bellow type, sylphon type, high temperature pressure disc type, and lever ball float type. Materials of the products can be carbon steel, austenitic stainless steel, alloy steel and other special materials.
The valves manufactured by our company are widely applicable to the fields of petroleum, chemical industry, power industry, metallurgy, pharmacy paper making and food with good reputation and reliability from users. Main materials used: Stainless steel, special steel, WCB, WC9, 2GCr5Mo, 2G1, etc.
Our company obtained the quality certification of ISO9001, API 6D, the authentication of TS. According to quality system standards, we try our best to innovate and develop kinds of competitive products. The development strategy of company is adhering to "quality first, service first, continuous improvement and innovation to meet the customers".
We sincerely welcome the customers at home and abroad to inquiry and visit our company.
