tool-buy

Home Toolbuy Products Sanitary NPT Adapter Tri Clamp 2 Inx Mnpt 2 Inslotted

Sanitary NPT Adapter Tri Clamp 2 Inx Mnpt 2 Inslotted

Sanitary NPT Adapter Tri Clamp 2 Inx Mnpt 2 Inslotted
Price: US $ 12/Piece
Min Order: 1/Piece
Pay Type: T/T,D/P,Western Union,Paypal

NPT Adapter | Tri Clamp 2 in. x MNPT 2 in.

Stainless Steel Sanitary Fittings

1. ss304 stainless steel
2. 3A standard
3. NPT male or female threads in 1/4"

National Pipe Taper (NPT) are a standardized fitting that is commonly used for joining pipe. Due to the tapered threads (wider diameter at the base of the threads, similar to a trapezoid) the male fitting will tighten the further it is threaded into the female. NPT follows the technical standards provided by the American National Standard Pipe Thread standards, often called national pipe thread, which is often where the confusions with NPT arises, as NPT is specifically an acronym that referes to tapered pipe.

National Pipe Straight (NPS) are straight thread that is sized to be compatible with common water heater elements and should be compatible with most NPS straight threads.

Determining NPT/NPS Size:
Sizing NPT/NPS is based on the nominal pipe diameter, and not the ouside diameter (OD) of the threads. For example: A 1/2" NPT male has an outside thread diameter of approximately 3/4", but as stated the correct NPT size is 1/2", including the counterpart female.

Notice: While NPT and NPS threads may be joined together, their threads may not form a proper seal, be loose fitting, or otherwise not an optimal connection.


We manufacture T304 or T316L Sanitary Polish Triclamp Fittings found primarily in the Bakery, Beverage, Cosmetic, Dairy, Food or Pharmaceutical Industries. Our Sanitary Butt Weld Fittings can meet or exceed 3A/DIN/BPE etc standards with an ID polish of 180 Grit or 25 Ra on the Inside of the Tube and a 150 Grit or 32 Ra on the Outside of the tube.  NEW TEK supplies each Sanitary Butt Weld product with the size and alloy and a heat number for full traceability for either alloy. Our Sanitary Butt Weld Fittings are made to close tolerances to permit easy and fast installation of a corrosion resistant, crevice free, fully sanitary process line. As a suggestion, you may wish to weld using the tungsten gas method  for true fusion of wall to minimize pitting and thinning. Material test reports can be provided. 

Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

QC Team






We ship products all over the world.

 
Availably standardSMS,DIN,3A,IDF,RJT, BS, ISO
Material QualitySS304,SS304L,SS316,SS316L
Specification1/2"-12"
Available ConnectionWelding ends, triclamp ends, union ends, male ends etc.
Available Polishing180 Grit ,240 Grit, 320 Grit ,420 Grit,Unpolished
Available Thickness1.5MM,1.65MM,2MM,2.5MM,3MM,4MMetc.
Pressure range-bar~10bar
Temperature Range-20degree Celsius~135degree Celsius

More products we can provide: 
       1  .Sanitary valve
            Sanitary Butterfly Valves
            Sanitary Check Valves
            Sanitary Ball Valvess
            Sanitary Reversal Valve
            Sanitary Diaphragm Valves
            Sanitary Sample Valves
            Sanitary Safety Valves
            Sanitary Control Valves
            Sanitary Relief Pressure Valves
        2. Sanitary Pipe Fittings
            Sanitary Elbow
            Sanitary TeeSanitary Reducer
            Sanitary Cross
            Sanitary Triclamp Ferrule
            Sanitary Cap
            Sanitary Pipe Hanger
            Sanitary Tank Cleaning Ball
            Sanitary Hose Joint
            Sanitary Unions
            Sanitary Sight Glass
            Sanitary Strainer
        3. Sanitary Manways
            Sanitary Round Manway without Pressure
            Sanitary Round Manway with Pressure
            Sanitary Square Manway
            Sanitary Oval Manway
        4. Sanitary Pumps
            Sanitary Centrifugal Pump
            Sanitary Lobe Pump
            Sanitary Self Priming Pump
         5.Sanitary Tanks
            Storage Tank
            Fermentation Tank
            Mixing Tank
            Warm-keeping Tank
          6.Sanitary Tube 
            Seamless Tube 
            Weldless Tube
          7.Sanitary Gasket
             Silicone/EPDM Gasket for Triclamp
             Silicone/EPDM Gasket for Union
             Silicone/EPDM Gasket for Butterfly Valve
             Silicone/EPDM Gasket for Manhole Cover     


 
Prod Model: NT-TCMPT-2X2
Other Standard: SMS, DIN, Idf, Rjt, BS, ISO, Bpe etc
Warranty: 1 Year
Process: Pipe-Raw Material-Polish-Check-Packing
Treatment: Mirror Polish/Brushed/Electric Polish
Material: Stainless Steel
Connection: Male
Surface Treatment: CNC Machine
Founded in 2002, New Tek Industrial Co., Ltd, as a global valves and Fittings manufacturer and stainless steel tanks supplier, has grown to become one of the leading stainless steel products manufacturers for high precision stainless steel sanitary valves, pumps and pipe fittings. Our products including valves, pipe fittings, tank accessories and stainless steel tanks both in sanitary and industrial field. The products are widely applied in dairy, beer, food, pharmaceutical, beverage, cosmetics and chemical industries.

New Tek introduce actively domestic and international advanced production equipment and professional manufacturing process, the series products are made from stainless steel AISI304, AISI316L, strictly according to DIN, 3A, SMS, ISO, IDF, RJT, DS, BS, BPE industrial standard request, and keep strict inspection and control during production, that make us develop stable and continuously.

New Tek has our own factory, complete CNC machines workshop, QC team, welding and polishing workshop, gaskets workshop, package workshop, 3 floors warehouse. The real one stop service, to save more money for you.

Send your message to this manufacturer

  • Wenzhou Fuchuang Machinery Co., Ltd.

More >

Other Toolbuy Products with This Manufacturers

About Us Toolbuy Products Toolbuy Manufacturers Hot Toolbuy Toolbuy News Toolbuy Trade Shows Site Partners Contact Us Sitemap