Our 3 hinge pressure clamps are available in stainless steel SS304 or SS304, with sizes ranging from ½ inch up to 12 inches. Double hinge pressure clamps are an upgraded solution for most intended Tri Clamp fitting connections. They distribute pressure more evenly and can handle a higher pressure load than single hinge clamps. The wing nut style tightening screw allows for quick and easy assembly without the need for extensive tools.
We recommend that all standard double hinge pressure clamps be tightened by hand, with an additional maximum of two turns using a screw driver to apply proper pressure and ensure a solid, leak free seal. However, over tightening a pressure clamp may cause the gasket to fail from over-compression and place too much tension on the clamp threads.
NEW TEK Sanitary offers a complete line of replacement components and accessories to compliment our sanitary clamps. While these clamps are designed for heavy duty applications, over time the wear and tear of repeated change outs will start to take a toll. So, whether it's a lost nut or cross threaded bolt, we have you covered!
Safety Note: Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to required torques. Tests are done hydrostatically with no water hammer or shock loads. Please note the pressure ratings of the described unions may be above the recommended pipe line operating pressures.
Material: SS304 common, SS316 is available.
Size:1/2"-12"/DN15-DN300.
Pressure: use 2inch as sample,300 PSI at 250 degree F and 500 PSI at 70 degree F (wing nut tightened to 25" lbs torque)
Nut option: middle hole/wing etc.
Packing & shipping information of the China Tri Clamp Butterfly Valves with Stainless Steel Fiber Handle.
Port: Shanghai Port or Ningbo Port,China
MOQ: 10piece
Supply ability: in stock
Payment terms: T/T,Western Union, Paypal, L/C
Packaging:Shrink Wrap-Carton Case-Exporting Plywood Case
Delivery time:Depends on quantity
Shipping mode:By sea,by air,by express
Our Service
| 1. Samples: Buyer bear the air fee, but this fee will be reduced from order directly |
| 2. Delivery: Never delay delivery time |
| 3. Ensure material pure |
| 4. After Sales: Please contact our After-sales service department in time within 30 days after you received the cargo. Tel: 0086-13186832570 ,Working Time: 9:00 a.m.- 6:00 p.m. (Beijing time) |
| Process | Please provide the copy of Sales Contract and describe the problems appeared. |
| Slight problem | Please send the proof to our After-Sales Department, we will reply within two days. |
Serious problem
| a. We will dispatch our Quality and Problems Appraisers to make a confirmation |
| b. Have a negotiation of the compensation and sign agreements |
| c. Our After-Sales Department will perform the duties as the agreements |
| Replacement | Free replacement if there is any quality problem |
1. Ten years of export experience
2. Pass SGS Certificate
3. Experienced R&D Department
4. Reliability
5. Reputation
6. Buyer's Specifications Accepted
FAQ:
1. Are you a trader or manufactor?
We are a manufactor with forging workshop, CNC machining workshop, polish workshop, gasket workshop, the real one-stop service.
2. Can your products reach to FDA , CE and 3A requirements?
Yes, all of our material can meet requirements of FDA, ISO and 3A Certificate.
3. Can you supply other stainless steel parts?
Yes, with our own factory, we can manufacture series valves and fittings, such as sanitary butterfly valve, sanitary check valve and diaphragm calves etc, various tank accessories as well, such as sight glass, strainers/filter, cleaning ball, And other pipe fittings, european unions, inline fittings in SMS, DIN, IDF, RJT, 3A,DS standards. Pipe ittings, ferrule, flbow, tee, reducer,cross and customized fittings, each product is tested well by our serious Quality Control System, and we also have excellent distribution service to support you and promote your business.
4.Lead Time:
We ship products overworld.
For large quantity, as usual, it can be sent out within 20-40 days, ferrules, unions, elbows, sight glass, manways etc in common size are often in stock. DHL, FedEx, UPS OR TNT Courier are optional.
Big cargo will be delivered by Air freight or By Sea.
5.Our Service:
About payment:
Payment methods: L/C, T/ T, Western Union
6.About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent you by door to door servie. We will choose the shipping way as you required: By sea, by air or by express.
7.For OEM products:
We will finish the production within 20-40 days for bulk order after payment has been confirmed. 1-2 days delivery time for stock products. We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our mission.
8.Warranty:
Any question will be responded within 12 hours, one year warranty for stainless steel parts.
9.Problem Solution:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you, or we can send you brand new one for replacement.
10.Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
We also supply:
1.Sanitary valve
Sanitary Butterfly Valves
Sanitary Check Valves
Sanitary Ball Valvess
Sanitary Reversal Valve
Sanitary Diaphragm Valves
Sanitary Sample Valves
2. Sanitary Pipe Fittings
Sanitary Elbow
Sanitary TeeSanitary Reducer
Sanitary Cross
Sanitary Triclamp Ferrule
Sanitary Cap
Sanitary Pipe Hanger
Sanitary Tank Cleaning Ball
Sanitary Hose Joint
Sanitary Unions
Sanitary Sight Glass
Sanitary Strainer
3. Sanitary Manways
Sanitary Round Manway without Pressure
Sanitary Round Manway with Pressure
Sanitary Square Manway
Sanitary Oval Manway
4. Sanitary Pumps
Sanitary Centrifugal PumpSanitary Lobe Pump
Sanitary Self Priming Pump
5.Sanitary Tanks
Storage Tank
Fermentation Tank
Mixing Tank
Warm-keeping Tank
6.Sanitary Tube
Seamless Tube
Weldless Tube
7.Sanitary Gasket
Silicone/EPDM Gasket for Triclamp
Silicone/EPDM Gasket for Union
Silicone/EPDM Gasket for Butterfly Valve
Silicone/EPDM Gasket for Manhole Cover
Welcome to contact us for stainless steel aspetic sanitary ss304 ss316L sample cock valve
Founded in 2002, New Tek Industrial Co., Ltd, as a global valves and Fittings manufacturer and stainless steel tanks supplier, has grown to become one of the leading stainless steel products manufacturers for high precision stainless steel sanitary valves, pumps and pipe fittings. Our products including valves, pipe fittings, tank accessories and stainless steel tanks both in sanitary and industrial field. The products are widely applied in dairy, beer, food, pharmaceutical, beverage, cosmetics and chemical industries.
New Tek introduce actively domestic and international advanced production equipment and professional manufacturing process, the series products are made from stainless steel AISI304, AISI316L, strictly according to DIN, 3A, SMS, ISO, IDF, RJT, DS, BS, BPE industrial standard request, and keep strict inspection and control during production, that make us develop stable and continuously.
New Tek has our own factory, complete CNC machines workshop, QC team, welding and polishing workshop, gaskets workshop, package workshop, 3 floors warehouse. The real one stop service, to save more money for you.
