M2 Fully grinded twist drill
Characteristic: :
1,Using high-quality steel 6542, produce by advanced rolling process.The vertex is 135°,and open double rear angle,can be fully improve the durability of the drill bit and centering performance.
2,Head special sharpening,high hardness,in the drilling of the workpiece material, especially stainless steel has excellent performance
3,Molding by one time,with a higher wear resistance and better toughness
Notice:The drilling speed must be appropriate, the gravity center must be stable when work
D=1.1-1.5mm
| M2 Fully grinded twist drill |
| No. | specification | package |
| 1 | φ0.5-1.0 | 100pcs |
| 2 | φ1.1-1.5 | 100pcs |
| 3 | φ1.6-2.0 | 100pcs |
| 4 | φ2.1-2.5 | 100pcs |
| 5 | φ2.6-3.0 | 100pcs |
| 6 | φ3.1-3.2 | 100pcs |
| 7 | φ3.3-3.5 | 100pcs |
| 8 | φ3.6-4.0 | 100pcs |
| 9 | φ4.1-4.2 | 100pcs |
| 10 | φ4.3-4.5 | 100pcs |
| 11 | φ4.6-5.0 | 100pcs |
| 12 | φ5.1-5.2 | 100pcs |
| 13 | φ5.3-5.5 | 100pcs |
| 14 | φ5.6-6.0 | 100pcs |
| 15 | φ6.1-6.5 | 50pcs |
| 16 | φ6.6-7.0 | 50pcs |
| 17 | φ7.1-7.5 | 50pcs |
| 18 | φ7.6-8.0 | 50pcs |
| 19 | φ8.1-8.5 | 50pcs |
| 20 | φ8.6-9.0 | 50pcs |
| 21 | φ9.1-9.5 | 50pcs |
| 22 | φ9.6-10.0 | 50pcs |
| 23 | φ10.1-10.5 | 50pcs |
| 24 | φ10.6-11.0 | 50pcs |
| 25 | φ11.1-11.5 | 50pcs |
| 26 | φ11.6-12.0 | 50pcs |
| 27 | φ12.1-12.5 | 50pcs |
| 28 | φ12.6-13.0 | 50pcs |
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
